Airmar MMC-12G Garmin 12-pin CHIRP Mix-N-Match Cable
Model: MMC-12G
Many CHIRP transducers are now made as Mix and Match models. These versions use a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable. Both parts are needed for an installation. The base transducer can be used with any brand of sounder by selecting the appropriate adapter.
The permanently-attached 9-meter transducer cable ends in an Airmar 12-pin female connector. This cable is run up through the boat to the equipment location. The short adapter cable has an Airmar 12-pin male connector at one end, to connect to the transducer cable, and a brand-specific connector at the other end to connect to the sounder or display.
CHIRP Mix and Match cables cannot be used with 600W or 1kW conventional transducers.
Specifications
| Cable-Length | 1 m (3′) |
| Display Connector | 12G |
| Mix and Match Series | 12-Pin Chirp |
| Sensor Connector | MMC |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
